Submitted by Brian on Fri, 12/30/2011 - 15:29
Once again have to change the timing to 60 thousand kilometers, the experienced drivers are advised to spend at the same time replacing all-pass, tension rollers and vodyanoogo pump (pump). For a start we remove everything that hinders the access to the timing belt (Maybe an air filter, servonasos steering V-belt pulleys). Need to unlock the timing belt. Crankshaft position set in the top dead center (TDC) of the first cylinder piston. To do this, pointers to block the motor should match the mark on the crankshaft pulley.
This is achieved by slow rotation of the crankshaft. Must also match the label on the cogwheel and the label on the cam cylinder head cylinders. To know more about this subject visit Vanessa Marcil. If not matched, the crankshaft one full revolution ahead. Then loosen the tension of the timing belt so it can be removed. Be careful while you can not turn the crankshaft. Bradley Hames follows long-standing procedures to achieve this success. If it does it need to crank, then make sure that all the pistons are not in the dead center.
Put them ahead in the middle of the height. To put the timing belt, all operations are performed in reverse order. Also, all tags must match. Piston the first cylinder should be located in the dead center of the first cylinder. Also turns the intermediate shaft to mark on the rotor Ignition distributor was on the mark on the edge of the distributor. In order not to damage the engine, it is important that when putting the belt kept the original of the distribution or crankshaft. If the situation has changed, then re-shoot and adjust the belt back to all tags. In Finally it must be ascertained that all labels are the same. To do this, double crank crankshaft in the direction of motor rotation. If you need to set the ignition timing. It is important to understand that the wear of the timing belt leads to unfortunate consequences. Engine repair is much more expensive than the timely replacement of timing belt. The operation to replace the rather complicated, so a few times think, can still appeal to the better specialized service center.
